 |
MAXICUT
The
fastest cutter for hard metals. The rate of metal removal is high,
with little emphasis on brightness. To be used on sisal buffs for
the removal of scratches and "orange peel". May be used
on all metals.
20
bars per carton.
|
 |
FERROPOL
MG
Medium greasy fast cutter with low brightness. The grease
composition adheres well to the buff, permitting less frequent application
of polish to the wheel, therefore very economical. Suitable for
all metals, especially before electroplating.
20 bars per carton.
|
 |
BRIGHT-CUT
A
fast cutter for all metals with medium brightness. May be used on
a sisal buff for cutting, followed on a cotton buff for medium brightness.
20 bars per
carton.
|
 |
FASTCUT
A fast and economical cutter for hard metals. The rate of metal
removal is high, with less emphasis on brightness. To be used on
sisal buffs for the removal of scratches and "orange peel"
from all metals.
25 bars per carton
|
 |
WHITE
CUTTER P2
A fast cutter for all metals with medium brightness, very
clean. May be used on a sisal buff for cutting, followed by a cotton
buff for medium brightness. The wax content is low, making it easy
for the polisher to observe the progress of his work.
20 bars per carton.
|
 |
SPRAY
CUT
Used for automatic polishing machines. Liquid version of FASTCUT.
Sold in 20 litre buckets
or 200 litre drums.
|
|
CUTTER
LQ10X
Liquid version of Sisal Shine U. Cuts less than Spray Cut,
but brighter result.
Sold in 20 litre buckets
or 200 litre drums.
|
